DF1UD EN

Figure

Description

Piece

Original
price

Endstufe SB220 Heathkit

• mit 2 x 3-500Z (in addition 2 x 3-500Z as replacement))
• operational, perhaps something dust removal! <br> • Description under Oldtimer

In the year 1996 I refitted the final stage and thereby some sections of the amplifier got a hardware-upgrade, and of course with kits of the company:
HARBACH ELECTRONICS, Melbourne, Florida, USA

1

TNC3S
16 bit high speed dual port packet-radio-controller

There are two modems are used simultaneously. The modems are plug and can be combined with the base.
Data transmission at very high speeds is possible.
Software: Turbo-Firmware 10 to max. 200 radio channels, voice mail for 10 users simultaneously, Crossdigipeating, KISS, SMACK, test program, DAMA. Compatible with popular programs such as TNC GP, SP, AHP, TOP, VP, etc.. Can be used as TheNetNode and FlexNet node. The TNC3 is 100% pin-to TNC2S or TNC2H.

1

300,00 €

MFJ1278B - TNC MULTIMODE / DSP mit MFJ-780

The MFJ-1278B ten mode computer interface has RTTY, PACTOR, Packet 300/1200, Amtor, SSTV, Navtex, CW and FAX capability.

Exclusive MFJ hardware features include: <br> 20 LED precision tuning indicator, built-in parallel printer port , individual radio port output level controls, TAPR internal modem header for high speed modem -- 2400 or 9600 baud, monitor amplifier, volume control, speaker jack for monitoring receive/transmit data, ten user programmable message memories, CW iambic paddle input, IC sockets used throughout and free 110 VAC power supply. The Color SSTV section, transmits and receives: Robot Color: 36, 72 seconds, Robot B/W: 8, 12, 24, 36 seconds, Scotty Color: 1 and 2, Martin Color: 1 and 2.

1

495,95 €

Tranceiver Line TS-510 mit

• TS-510 Transmitter-Receiver
• PS-510 Power Supply and Speaker Unit
• VFO-5D Remote VFO (Variable Frequency Unit)
• MC-30 HAM Hand Dynamic Microphone (wenn auffindbar)

Year of manufacture 1970
• as described in Oldtimer

After reassembly of drive belts (rubber rings for the frequency setting and the power amp matching) the whole is functional.
For the spare rubber rings, I took earlier sections of bicycle inner tube (tube 28 ") of approximately 3 mm wide.
Worked perfectly.

1

???

HARI 80/40m DOUBLE-DIPOLE
- Unused, still packed in original

• The 80/40 m double dipole is something of broadband as a W3DZZ for 80/40 meters, so that with a good SWR on both bands
can be expected.
• 1:1 Balun (1 KW) and Endisolatoren fully assembled.
• highly flexible steel cable with plastic sheath and box clamps, and a water-protected SO239 jack for connecting a 50 Ohm coaxial cable.
• power: 1 KW SSB / CW (2 KW PA DC input)
• Length 80 m part: 38,50 m
• Length 40 m part: 20,50 m

1

80,- €
+ Shipping

DiSEqC Motor Stab HH 100
- only 1 * sample construction

* Mirror suitable for up to 100 cm
* SATELLITE MOTOR: HH-100
* DiSEqC 1.2 Positioner
* Antenna diameter max. 120 cm
* Antenna weight max. 12 kg
* Mast 50-83 mm
* 125 mm diameter motor shaft
* Motor shaft 54 mm
* Operating protocol DiSEqC 1.2
* Maximum Rotation + / - 62 °
* Rotation speed 1,8 ° / s @ 18 V, 1.2 ° / s @ 13 V
* Programmable positions 49 satellites
* Preset positions 28 satellites
* Software Programmable Limits form 5 ° to 62 °
* Fine tuning impulse 0.1
* Inclination angle of 15 ° to 70 °
* F connectors - Type
* Connection Coaxial Cable Power Sat 13/18 Vdc
* Consumption in stand-by 30 mA
* Consumption 190 mA in operation
* Current consumption 350 mA (Max)
* Operating Temperature -40 ° C ~ + 80 ° C
* Maximum Relative Humidity 100%
* Weight 3 kg

1

85,00 €
+ Shipping